Product Details:
Brand | Circle machinery |
Model Number | Jig Boring Machines |
Automation Grade | Automatic |
Material | Mild Steel |
Machine Type | Cylinder Boring Machine |
Length | 0-30 mm |
Bore Size | 2-3 inch |
Max Boring Depth | 0-50 feet |
Max Bore Size | 0-1 inch |
Range Of Spindle Speed | Jig Boring Machines |
Site Location | Jig Boring Machines |
Size Millimetre | Jig Boring Machines |
I Deal In | New Only |
make : | Hauser |
model : | JIG GRINDER3SM |
specification : | grinder had a 550 x 320 mm |
Detail: | Hauser 3SM Jig Grinder (non-optical) A distinctive, stand-alone model not based on any of the Company's jig borers, the Type 3SM jig grinder had a 550 x 320 mm (21.5" x 12.5") table with a longitudinal travel of 400 mm (16") and a transverse of 250 mm (10"). The vertical slide could be elevated through a distance of 400 mm (16") to give a maximum clearance between spindle nose and table of 470 mm "18.5"). Table positions were measured by hardened, ground and stress-relieved precision leadscrews fitted with massive (and illuminated) micrometer drums and vernier scales. In addition, an automatic vernier scale automatic compensation device was fitted, the operation of which is described in the opening to the Hauser section (above). The micrometer dials read to 0.01 mm (0.001") and the verniers to 0.001 mm (0.0001") with the makers guaranteeing an accuracy of setting to within 0.003 mm (0.00015"). Able to grind bores up to approximately 190 mm (7.5") and driven directly by a top-mounted electric motor, the oil-mist lubricated grinding head could have the following movements infinitely varied: rotational speed from 16,000 to 80,000 r.p.m.; axial stroke between 5 and 90 mm (3/16" and 3.5"); a reciprocating motion of up to 1.8 m/min (6-ft/min) and a planetary action that could be set between 10 and 300 r.p.m. - the last two being driven hydraulically. In addition, the head could be set to automatically disengage the in-feed at a pre-set diameter. |
Additional Information:
Features:
Dimensional accuracy
High performance
Easy to use
Additional Information:
Features:
Long service life
Lightweight
Compact design
Additional Information:
make : | Wmw |
model : | BKoE 630 x 1000/1 PA 2 |
specification : | 1000 x 630 |
Detail: | Manufacturer: WMW Type: BKoE 630 x 1000/1 PA 2 Year of construction: Machine condition: good Offertype: used machine offer Technical data: table: 1000 x 630 mm, spindle 40 ISO, X/Y/Z = 710/400/200 mm, quill axis 630 mm Acc.: DRO on 2 axis, various tool fixtures |
Additional Information:
make : | Hauser |
model : | JIG GRINDER |
specification : | Apart from a larger table - 595 mm x 320 mm |
Detail: | Hauser 3-SMO Optical Jig Grinding Machine Apart from a larger table - 595 mm x 320 mm (23.5" x 12.5'') that had the same travel as the non-optical version and the inclusion of directly-read high-precision standard scales - the Type 3-SMO was identical to the ordinary Type 3-SM. Microscope observation of the ruler scales allowed an increase in reading accuracy from 0.0001" on the verniers to better than 0.00005" (though the maker''s technical documentation on this point was not as clear as it should have been). An accuracy of settings to within 0.002 mm (0.001") was guaranteed. |
Additional Information:
make : | Hauser |
model : | 3 SMO |
specification : | x-travel 400 mm y-travel 250 mm |
Detail: | Type of machine Jig Grinding Machine Make HAUSER Type 3 SMO Year of manufacture Serien-No. 907/82 Type of control conventional x-travel 400 mm y-travel 250 mm workpiece height 500 mm grinding diameter max. 220 mm table surface area 600 x 320 mm throat 310 mm range of angles 12 grad grinding spindle slide - vertical movement 110 mm stroke speeds 0 - 6 m/min. grinding spindle speed bis 50.000 U/min. peripheral speed max. 35 m/sec capacity ca. 7 kVA power capacity 6 kW weight of the machine ca. 2 t dimensions of the machine ca. 3 x 3 x 3 m Additional information Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz |
Additional Information: